2m (7ft) MTP®-8 APC Female to 4 MDC UPC Duplex Fiber Harness, 8-Fiber OS2 Single Mode, Type B, OFNP Plenum, 0.35dB

This 2m (7ft) MTP®-8 APC female to 4 MDC UPC duplex harness provides an 8-fiber OS2 single-mode breakout solution for high-density data center connectivity. With Type B polarity, low-loss connectors, G.657.A1 fiber, and an OFNP-rated 3.0mm main cable, it is designed for MTP® to MDC connections in high-density network architectures.

SKU MCMC-D023RYL06 Category
Share this product with

This 2m (7ft) MTP®-8 to 4 MDC duplex breakout harness is designed to provide a high-density transition from a single 8-fiber MTP® connection to four compact MDC duplex connections. The factory-terminated and tested assembly combines a US Conec MTP® Elite female connector with four MDC UPC connectors to provide consistent optical performance and simplified deployment in high-density data center environments. The MDC connectors feature a very small form factor based on proven 1.25mm ferrule technology, while the push-pull boot allows easier connector access in densely populated connectivity areas.

Built with OS2 9/125μm G.657.A1 single-mode fiber and an OFNP plenum-rated jacket, this harness is suitable for high-speed optical interconnects and structured data center cabling. Its Type B polarity configuration supports compatible MTP® connectivity architectures and provides a practical way to connect QSFP-DD, QSFP28, and QSFP+ transceivers with MDC patch panels, cassettes, and other high-density fiber systems.
Connector Type AUS Conec MTP® Elite Female, Non-Pinned
Connector Type B4 × US Conec MDC UPC Duplex
Connector ConfigurationDuplex, 2-Fiber
Fiber Count8 Fibers
Fiber TypeSingle Mode OS2
Polish TypeUPC
Connector DesginPush-Pull Boot, Uniboot
Insertion Loss≤ 0.25 dB Typical
Return Loss≥60dB
Cable Diameter3.0mm
Cable JacketOFNR Riser
PolarityType B
Operating Temperature−20°C to +70°C
StandardsIEC 61754-36 / TIA-604-38 / RoHS
  • MTP®-8 APC female to 4 MDC UPC duplex breakout configuration
  • 8-fiber OS2 9/125μm single-mode fiber
  • Type B polarity for compatible MTP® connectivity architectures
  • US Conec MTP® Elite female non-pinned connector
  • Four compact US Conec MDC UPC duplex connectors
  • MDC VSFF design based on proven 1.25mm ferrule technology
  • Push-pull MDC boot for easier access in dense connectivity environments
  • MTP® connector insertion loss of ≤0.35dB
  • Typical MTP® connector insertion loss of 0.15dB
  • MDC connector insertion loss of ≤0.3dB
  • MTP® connector return loss of ≥60dB
  • MDC connector return loss of ≥50dB
  • G.657.A1 bend-insensitive single-mode fiber
  • QSFP-DD, QSFP28, and QSFP+ transceiver connectivity
  • MTP®-based data center cabling systems
  • MTP® to MDC patch panel connections
  • MDC fiber patch panels and cassettes
  • High-density switch-to-patch-panel connections
  • Data center spine-leaf network architectures
  • Server and switch interconnects
  • High-density fiber distribution and cross-connect systems

We provide OEM and customized MTP® breakout harness solutions for data center operators, network integrators, and structured cabling projects.

  • Custom cable lengths according to rack and equipment layouts
  • Customized MTP® and MDC connector configurations
  • MTP® polarity options for compatible system architectures
  • Connector polishing options according to application requirements
  • Customized fiber counts and breakout configurations for selected assemblies
  • Custom main cable and breakout cable diameters where applicable
  • Customized cable jacket and flame-retardant ratings

What is the purpose of breaking out one MTP®-8 connector into four MDC duplex connectors?

The breakout structure converts an 8-fiber MTP® interface into four individual duplex MDC connections. This provides a practical transition between MTP®-based trunk or equipment connectivity and compact MDC interfaces used in high-density patching and transceiver environments.

What does Type B polarity mean for this harness?

Type B refers to the fiber mapping arrangement between the two ends of an MTP® assembly. It determines how the transmit and receive positions are mapped through the harness and should be matched with the polarity scheme of the connected trunk, cassette, patch panel, or transceiver system.

Why does the MTP® connector use a female, non-pinned configuration?

The MTP® connector on this harness is a female, non-pinned type designed to mate with a compatible pinned MTP® interface. The pin configuration should therefore be checked when selecting the mating connector or equipment to ensure mechanical compatibility.

What is the advantage of using 2.0mm MDC breakout legs?

The 2.0mm breakout legs provide a compact cable profile for dense equipment and patching environments. The smaller diameter helps simplify cable routing and management where available space around transceivers, patch panels, and racks is limited.

Why are the MTP® and MDC insertion loss specifications listed separately?

MTP® and MDC are different connector interfaces with different optical structures, so their optical performance is specified independently. This assembly provides separate insertion loss limits for each connector type, allowing the performance of both interfaces to be evaluated within the complete harness.

Why is an OFNP-rated cable used for this assembly?

OFNP is a plenum-rated fiber cable classification intended for installations where plenum-rated cabling is required. This makes the harness suitable for compatible indoor plenum spaces, subject to applicable building codes and installation requirements.