• LC Uniboot Hybrid Cable with 2F OS2 Single-Mode Armored Fiber and 2x12AWG DC Power
  • Close-up of LC Uniboot connectors on hybrid armored fiber and DC power cable
  • LC Uniboot Hybrid Cable with 2F OS2 Single-Mode Armored Fiber and 2x12AWG DC Power
  • Close-up of LC Uniboot connectors on hybrid armored fiber and DC power cable

LC Uniboot Hybrid Cable 2F SM Armored Fiber with 2x12AWG DC Power

The Fiber/Power Hybrid Cable combines two single-mode armored fibers with dual 12AWG DC power conductors in one robust LSZH jacket. Designed for efficient power and data transmission over long distances, this compact hybrid cable with LC Uniboot connectors simplifies installation and reduces cabling complexity for modern network deployments.

SKU LULU-ASM023LBK05 Categories ,
Request a Quote
Share this product with

This 2F SM Armored Fiber/Power Hybrid Cable integrates both optical fibers and power conductors into a single, durable structure — providing a reliable “one-cable” solution for data and power delivery in high-density network environments.

The LC UPC Uniboot connectors ensure compact connectivity with precise alignment and minimal insertion loss, while the armored design offers superior protection in harsh or outdoor conditions. Built with G.657.A1 single-mode OS2 fibers, this hybrid cable delivers exceptional transmission performance at 1310/1550nm wavelengths and ensures long-term stability with low attenuation.

The Low Smoke Zero Halogen (LSZH) outer jacket enhances safety in enclosed spaces, and the dual 12AWG power cores efficiently support DC power transmission up to 300V. Ideal for FTTA (Fiber to the Antenna), outdoor surveillance systems, and 5G infrastructure, this hybrid design significantly reduces installation time and total cabling cost while maintaining superior optical performance.

**What is Uniboot Connectors

A Uniboot connector is a specially designed fiber optic connector that uses a single, slim duplex cable to carry two fibers, instead of the traditional two separate cables. By combining the transmit (Tx) and receive (Rx) fibers into one compact structure, Uniboot connectors significantly reduce cable bulk and improve airflow in high-density environments such as data centers.

Uniboot connectors typically use LC duplex interfaces and feature a reversible polarity design, allowing technicians to switch polarity easily without the need for tools. This makes them ideal for modern high-speed networks where fast installation, flexible routing, and space efficiency are essential.

Uniboot Key Advantages

  • Reduced Cable Congestion: A single round cable replaces two patch cords, simplifying cable management.

  • Easy Polarity Reversal: Most Uniboot designs allow quick polarity changes to meet different system requirements.

  • Higher Density: Slimmer cable profiles enable more connections in limited rack space.

  • Improved Airflow: Less cable bulk supports better cooling in data center environments.

  • Enhanced Aesthetics & Efficiency: Cleaner routing and more organized patching.

Uniboot Typical Applications

  • High-density data centers

  • Top-of-rack (TOR) and end-of-row (EOR) networks

  • SAN storage systems

  • Cloud and hyperscale deployments

What’s the Difference Between LC Normal and Uniboot?

Feature LC Normal (Standard LC Duplex) LC Uniboot
Cable Structure Two separate zip-cord fibers One slim duplex round cable
Cable Bulk Bulkier, takes more space 50% cable reduction, cleaner routing
Polarity Change Manual; often requires tools or clips Quick, tool-less polarity reversal
Space Efficiency Lower; suitable for standard density High-density; ideal for data centers
Airflow & Cooling More cable congestion Better airflow and thermal management
Installation Convenience Basic installation Easier cable management & maintenance
Typical Use General network environments High-density panels, cloud & hyperscale
Cost Lower cost Slightly higher, premium design

Armored Fiber Optic Patch Cords Selection Guide

SKU Fiber Count Connector A Connector B Fiber Mode Features Length Color
FAFA-ASM023RYL01 2 FC/APC Duplex FC/APC Duplex OS2 OFNR, Armored 1M Yellow
LALA-ASM013LWH05 2 LC/APC LC/APC OS2 LSZH, Armored 5M White
LCLC-AM1023ROR01 2 LC/UPC Duplex LC/UPC Duplex OM1 OFNR, Armored 1M Orange
LCLC-ASM023RBK15 4 4 LC 4 LC OS2 OFNR, Armored 5M Magenta
LCLC-ASM065RBL30 6 6 LC/UPC 6 LC/UPC OS2 OFNR, Armored 30M Blue
LULU-ASM013RBK05 1 LC/UPC LC/UPC OS2 TPU, Armored 16FT Black
LULU-ASM023LBK05 2 LC LC SM Armored, DC Power
SASA-ASM014LBK30 1 SC/APC SC/APC OS2 LSZH, Armored 30M Black
STST-AM3023RAQ01 2 ST/UPC Duplex ST/UPC Duplex OM3 OFNR, Armored 1M Aqua
Fiber Count:Duplex
Fiber Mode:Single Mode: OS2 9/125µm
Fiber Grade:G.657.A1
Connector:LC UPC Unibooot
Cable Jacket:Low Smoke Zero Halogen (LSZH)
Rated Voltage300V
Insulation MaterialPVC
Insertion Loss (dB):≤0.3
Return Loss (dB):≥50
Wavelength (nm):1310/1550
Attenuation (dB/km):≤0.36 at 1310nm | ≤0.22 at 1550nm
Cable Diameter (mm)11
Min. Bend Radius (D)20/10 (Dynamic/Static)
Tensile Strength (N)200/400 (Long Term/Short Term)
Crush Resistance (N)1100/2200 (Long Term/Short Term)
Operating Temperature-20 to +70°C
Storage Temperature-40 to +80°C
Side A:UNIBOOT LC/UPC SM (BLUE HOUSING | WHITE BOOT)+2X12AWG RED/BLACK
Side B:UNIBOOT LC/UPC SM (BLUE HOUSING | WHITE BOOT)+2X12AWG RED/BLACK
Fiber cable type:G657A1 OS2 9/125μm | OD: 5.0mm | DUPLEX | LSZH | ARMORED | BLACK
Min bending radius:10D (Static); 20D (Dynamic)
Standards:ANSI/TIA/EIA 568-C.3

  • Integrated Power & Fiber Design – Combines 2-core single-mode OS2 fiber with 2×12AWG DC power conductors in a single jacket.

  • LC UPC Uniboot Connectors – Compact duplex connectors reduce cable bulk and simplify routing.

  • Armored & LSZH Jacket – Ensures high mechanical protection and fire-safe operation.

  • Low Insertion Loss (≤0.3 dB) – Guarantees stable signal performance for long-distance transmission.

  • High Return Loss (≥50 dB) – Provides excellent reflection resistance for optical stability.

  • Wide Operating Temperature – Reliable from -20 °C to +70 °C, storage down to -40 °C.

  • Strong Tensile & Crush Resistance – Designed for both indoor and outdoor environments.

  • Compliant with ANSI/TIA/EIA-568-C.3 industry standards.

  • FTTA (Fiber to the Antenna) and 5G small-cell backhaul

  • CCTV and outdoor surveillance systems

  • Wireless base stations and tower power integration

  • Industrial networking and smart-factory connections

  • Campus or enterprise backbone cabling where power and fiber are required together

As a professional OEM hybrid cable manufacturer, we provide full customization options to meet project-specific requirements:

Customization Options

  • Connector type: LC, SC, MPO, or custom hybrid assemblies

  • Fiber type: OS2, OM3, OM4, or OM5

  • Power conductors: 14–10 AWG copper or tinned copper

  • Cable length, color, labeling, and packaging customization

  • Branding: neutral, OEM, or customer-logo labeling

Factory & Production

  • Factory Location: Shenzhen, Guangdong, China

  • Manufacturing Certifications: ISO 9001:2015, CE, UL Compliant

  • Lead Time: 3–5 days for samples; 10–15 days for bulk orders

  • Minimum Order Quantity (MOQ): Flexible, starting from 10 pcs

  • Shipping Options: DHL, FedEx, UPS, air freight, or sea shipment from Shenzhen Port

Armored Fiber Optic Patch Cord Customization Options

Connector Type LC, SC, FC, ST, E2000, LC/APC, SC/APC, MPO/MTP®, Custom
Connector Configuration Simplex, Duplex, Breakout
Fiber Type OS2, OM3, OM4, OM5
Connector Polish UPC, APC
Armor Type Stainless Steel Tube, Flexible Steel Armor
Cable Diameter 3.0mm, 5.0mm, Custom
Cable Jacket LSZH, PVC, OFNR, OFNP
Cable Length 0.5m–100m, Custom

Quality Control

  • 100% optical and electrical testing before shipment

  • Insertion and return loss tested per IEC 61300 standards

  • Individual serial number tracking for traceability

Please view our Quality Control Page to know more about our quality system.

Related products

Sort Product By Tags#
1*32 2U 19" 3U 19" 4U 19" accessory Armored Bow-type Hybrid LC Adapter Panels MTRJ protection Quick Connector Ultra Compact Ultra HD