MTP-12 (x8) to MTP-12 (x8) 96-Fiber Single Mode G.657.A1 MTP Trunk Cable, APC, Type C

• 96-fiber single-mode configuration with eight MTP-12 connectors per end
• G.657.A1 bend-insensitive single-mode fiber for improved routing flexibility
• MTP® Elite® 12-fiber APC connectors for high-density optical connectivity
• Type C polarity for reverse-pair fiber mapping between connector ends
• Compact 3 mm micro-core cable construction
• High fiber density for space-efficient backbone cabling
• Low connector insertion loss, typically below 0.12 dB
• 97% of channels achieve connector insertion loss of ≤0.25 dB
• Return loss of ≥60 dB
• Cca-s1b,d0,a1 CPR fire classification
• Suitable for modular MTP/MPO cassette and adapter-based systems
• Factory-terminated and tested for consistent optical performance

• High-density data center backbone cabling
• MTP/MPO-based structured cabling systems
• Data center interconnects
• Fiber distribution and cross-connect systems
• MTP/MPO cassette and adapter module connections
• Telecom and central office optical infrastructure
• High-capacity single-mode fiber networks
• Backbone connections between network cabinets and fiber distribution areas

OEM and customized configurations are available to meet different network architecture and deployment requirements. Cable length, connector configuration, connector polarity, fiber type, connector performance grade, cable jacket specifications, and identification options can be customized according to project requirements.

Custom MTP/MPO assemblies with different connector combinations, fiber counts, breakout configurations, and labeling are also available for structured cabling projects and large-scale data center deployments. Please provide the required fiber count, connector type, polarity, cable length, and application environment when requesting a customized solution.

What does MTP-12 (x8) mean in this 96-fiber cable?

MTP-12 (x8) means that each end of the cable contains eight MTP connectors, with each connector accommodating 12 fibers. Eight 12-fiber connectors provide a total of 96 optical fibers at each end.

What is Type C polarity used for?

Type C polarity reverses the fiber pairs between the two ends of the assembly. This configuration is commonly used in duplex transmission systems where the transmit and receive positions need to be reversed while maintaining the required fiber mapping through the network.

Why is G.657.A1 fiber used for this trunk cable?

G.657.A1 fiber has improved bend performance compared with conventional G.652.D fiber, making it more suitable for high-density cabling environments where cables may need to be routed through compact pathways, cabinets, and cable management systems. It helps reduce the risk of excessive attenuation caused by tighter cable routing.

Can this cable be connected directly to standard MTP/MPO equipment?

Yes. The cable is designed around the standardized MTP/MPO interface and can be used with compatible MTP/MPO cassettes, adapter modules, and other components. However, the optical performance of the complete link depends on the connector quality, mating components, polarity, and overall system design.

What is the significance of the Cca-s1b,d0,a1 classification?

Cca-s1b,d0,a1 is a European CPR classification that describes the cable’s reaction-to-fire characteristics, including fire growth, smoke production, flaming droplets, and acidity/corrosivity. It can be an important specification when the cable is installed in buildings subject to CPR requirements.

Can the 96-fiber cable be customized for different network architectures?

Yes. The assembly can be customized with different cable lengths, connector configurations, polarity options, fiber specifications, and other construction requirements. Custom configurations are particularly useful when integrating the trunk cable with project-specific MTP/MPO cassette or distribution architectures.