1.25Gbps SFP Transceiver 1000BASE-T CAT5 RJ45 100M
The 1.25Gbps SFP Copper Transceiver enables 1000BASE-T Gigabit connectivity over RJ45 CAT5e/CAT6 cables up to 100 meters. It is hot-swappable and ideal for flexible network expansion in enterprise and data center environments.
-
Description
-
Specification
-
Features
-
Application
-
Custom Service
-
FAQ
The 1.25Gbps SFP Copper Transceiver (1000BASE-T) is a high-performance pluggable module designed to enable Gigabit Ethernet connectivity over standard copper cabling. It converts SFP ports into RJ45 interfaces, allowing seamless integration between fiber-enabled switches and copper-based network devices.
Supporting transmission distances up to 100 meters over CAT5e or higher Ethernet cables, this module provides a cost-effective and flexible solution for mixed network environments. It is fully hot-swappable and compatible with a wide range of networking equipment, making it ideal for enterprise networks, data centers, and access layer deployments. FiberMania also supports OEM customization for branding, EEPROM programming, and compatibility tuning.| Data Rate | 1.25Gbps (1000BASE-T) |
|---|---|
| Interface | RJ45 Copper |
| Cable Type | CAT5e / CAT6 / CAT6a |
| Transmission Distance | Up to 100 meters |
| Form Factor | SFP Hot-pluggable |
| Auto Negotiation | 10/100/1000 Mbps |
| Standards | IEEE 802.3 compliant |
| Power Consumption | Low |
| Operating Temperature | 0°C to +70°C |
| Compatibility | Most SFP-enabled switches/routers |
| Customization | EEPROM | branding | labeling |
- 1.25Gbps data rate supporting 1000BASE-T Gigabit Ethernet
- RJ45 copper interface for CAT5e/CAT6/CAT6a cables
- Transmission distance up to 100 meters
- Hot-swappable SFP form factor
- Low power consumption and stable performance
- Auto-negotiation for 10/100/1000Mbps compatibility
- Compliant with IEEE 802.3 standards
- Plug-and-play installation with no configuration required
- Wide compatibility with major switch and router brands
- Enterprise LAN networks
- Data center switching infrastructure
- Network expansion and uplink conversion
- Server and storage connectivity
- Telecom access networks
- Mixed fiber and copper network environments
- Custom EEPROM coding for brand compatibility
- Logo printing and label customization
- Packaging and private labeling
- Compatibility tuning for specific switch brands
- Bulk supply for enterprise and distributor needs
1. What is an SFP copper transceiver used for?
It allows SFP ports on network devices to connect to copper Ethernet cables, enabling Gigabit communication over RJ45 interfaces.
2. Is this module compatible with all SFP ports?
It is compatible with most standard SFP slots, but some vendors may require coded or brand-specific versions.
3. What cable type is required for 100m transmission?
CAT5e or higher (CAT6/CAT6a recommended) is required to achieve stable 100-meter performance.
4. Does it support auto-negotiation?
Yes, it supports automatic negotiation for 10/100/1000Mbps speeds depending on connected devices.
5. Can it be used in switches and routers interchangeably?
Yes, it is compatible with most enterprise-grade switches and routers with SFP slots.
6. Does it generate more heat than optical SFP modules?
Copper SFP modules typically consume more power and generate slightly more heat than fiber SFPs, but remain within standard operating limits.
Related products
-
2.5G-SFP-CW-80KM2.5G SFP CWDM 80km Single-Mode Fiber Optical Transceiver
-
SFP-LC-SX-0.55KM1.25Gbps SFP Transceiver SX 550m 850nm Multimode LC Optical Module
-
SFP-LC-LX-20KM1.25Gbps SFP Transceiver LX 20KM 1310nm Single Mode LC Optical Module
-
SFP-LC-SX+-2KM1.25Gbps SFP Transceiver SX+ 2KM 1310nm Multimode LC Optical Module
-
SFP-LC-EZX-40KMD1.25Gbps SFP Transceiver EX 40KM Single Mode 1550nm With Digital Diagnostic Monitoring
