Mode Conditioning Fiber Optic Patch Cable 2 x LC 62.5/125 to 1 x ST 9/125 & 1 x ST 62.5/125 10M
This mode conditioning fiber optic patch cable enables stable Gigabit Ethernet transmission over legacy multimode fiber. It combines singlemode and multimode fibers to eliminate signal distortion. Ideal for network upgrades and mixed fiber environments.
-
Description
-
Specification
-
Features
-
Application
-
Custom Service
-
FAQ
The Mode Conditioning Fiber Optic Patch Cable (MCP) is specifically engineered to enable reliable Gigabit Ethernet transmission over legacy multimode fiber infrastructure. This assembly features dual LC connectors on one end and a hybrid ST interface on the other, combining one singlemode (9/125μm) and one multimode (62.5/125μm) fiber. By launching the signal from the singlemode fiber into the multimode core with an intentional offset, it effectively eliminates Differential Mode Delay (DMD) and ensures stable signal propagation.
Designed for network upgrades and compatibility scenarios, this 10-meter MCP cable allows modern Gigabit LX/LH transceivers to operate over existing multimode cabling without performance degradation. It is widely used in enterprise networks, campus backbones, and telecom systems where maintaining legacy fiber while upgrading active equipment is required. Custom configurations are available to support OEM and project-specific deployments.
Featured Specialty Patch Cables Selection Table
| SKU | Fiber Count | Fiber Type | Cable Type | Connector A | Connector B | Features | Cable Color | Length |
| CSULCU-SM0523YL05 | 2 | OS2 SM | Uniboot | CS/UPC | LC/UPC | LSZH | Yellow | 5FT |
| LCLCUD-M3023RAQ01 | 2 | OM3 | Uniboot | LC/UPC | LC/UPC | OFNR, 3.0mm | Aqua | 1M |
| LCLCUD-M5023RBK02 | 2 | OM2 | Uniboot | LC/UPC | LC/UPC | Indstrial Grade, IP67, Dustproof, Outdoor | Black | 1M |
| LCULCU-M5022RLM | 2 | OM5 | Uniboot | LC/UPC | LC/UPC | OFNR, Pull Tab | Lime | 1M |
| LCLCUD-M5023RLM01 | 2 | OM5 | Uniboot | LC/UPC | LC/UPC | OFNR, 3.0mm | Lime | 1M |
| MCC-LCLCM1-3 | 2 | OS2, OM1 | Mode Conditioning | 2 LC OM1 | LC OS2 + LC OM1 | 3M | ||
| MCC-LCSTM1-10 | 2 | OS2, OM1 | Mode Conditioning | 2 LC OM1 | ST OS2 + ST OM1 | 10M | ||
| MCC-MJLCM1-3 | 2 | OS2, OM1 | Mode Conditioning | MTRJ | LC OS2 + LC OM1 | 3M | ||
| MCC-SCSTM1-10 | 2 | OS2, OM1 | Mode Conditioning | 2 SC OM1 | ST OS2 + ST OM1 | 10M | ||
| PMF-R023LSF | 1 | PM850 / PM980 / PM1310 / PM1550 | Polarization Maintaining | LC / SC / FC | LC / SC / FC | 1M |
| Connector Type A | 2 × LC |
|---|---|
| Connector Type B | 1 × ST (SM 9/125) + 1 × ST (MM 62.5/125) |
| Fiber Type | Hybrid (Singlemode + Multimode) |
| Multimode Fiber | 62.5/125μm (OM1) |
| Singlemode Fiber | 9/125μm |
| Cable Length | 10 Meter |
| Application | 1000BASE-LX/LH over multimode fiber |
| Jacket Type | Indoor (OFNR/LSZH optional) |
| Insertion Loss | ≤ 0.5 dB |
| Return Loss | ≥ 30 dB |
| Operating Temperature | -20°C to +70°C |
- Mode conditioning design eliminates Differential Mode Delay (DMD)
- Hybrid fiber structure: singlemode (9/125μm) + multimode (62.5/125μm)
- Dual LC connectors to ST hybrid interface for flexible integration
- Enables Gigabit Ethernet over legacy multimode fiber systems
- Factory-terminated and tested for consistent optical performance
- Optimized for use with LX/LH transceivers
- Gigabit Ethernet (1000BASE-LX/LH) over multimode fiber
- Network upgrades using existing multimode infrastructure
- Enterprise and campus backbone systems
- Data center legacy fiber integration
- Telecom and equipment room interconnections
- Mixed fiber environment compatibility solutions
We provide full OEM and ODM services to meet specific customer and project requirements. Custom options include cable length, connector types, fiber combinations, labeling, and packaging. Private branding and serialized identification are available for system integrators, distributors, and large-scale deployment projects.
Customize Your Specialty Fiber Patch Cord Solution
| Specialty Cable Type | Uniboot / Mode Conditioning / Polarization Maintaining (PM) |
| Fiber Type | OS2 / OM1-OM5 / Polarization Maintaining |
| Connector Type | LC / SC / FC / ST / MPO/MTP / Customized Connectors |
| Connector Polish | UPC / APC |
| Fiber Count | Simplex / Duplex / Multi-Fiber |
| Cable Jacket | PVC / LSZH / Plenum / OFNR / Armored Options |
| Cable Diameter | 1.6mm / 2.0mm / 3.0mm / Customized |
| Length | Customized Length Available |
| Polarity & Configuration | Duplex A-B / A-A / Customized Polarity |
| Testing & Certification | IL & RL Test Report / Customized Test Requirements |
Q1: What is a mode conditioning patch cable used for?
It is used to enable reliable Gigabit Ethernet transmission over legacy multimode fiber by reducing signal distortion caused by DMD.
Q2: Why does this cable combine singlemode and multimode fibers?
The singlemode fiber launches the signal in a controlled offset into the multimode fiber, improving transmission quality and reducing modal dispersion.
Q3: Is this cable required for all Gigabit Ethernet connections?
No, it is specifically required when using LX/LH transceivers over older multimode fiber infrastructure.
Q4: Can this cable be used for distances beyond standard multimode limits?
It improves signal performance but still depends on overall system design and transceiver specifications.
Q5: Are there different connector options available?
Yes, we offer various connector combinations and custom configurations to match different equipment interfaces.
Related products
-
MCC-LCSCM1-3Mode Conditioning Fiber Optic Patch Cable 2 x LC 62.5/125 to 1 x SC 9/125 & 1 x SC 62.5/125 3M
-
MCC-LCLCM1-3Mode Conditioning Fiber Optic Patch Cable 2 x LC 62.5/125 to 1 x LC 9/125 & 1 x LC 62.5/125 3M
-
MCC-SCLCM1-3Mode Conditioning Fiber Optic Patch Cable 2 x SC 62.5/125 to 1 x LC 9/125 & 1 x LC 62.5 3M
-
MCC-SCSTM1-10Mode Conditioning Fiber Optic Patch Cable 2 x SC 62.5/125 to 1 x ST 9/125 & 1 x ST 62.5 10M
-
MCC-STSCM1-3Mode Conditioning Fiber Optic Patch Cable 2 x ST 62.5/125 to 1 x SC 9/125 & 1 x SC 62.5 3M
