• Mode conditioning fiber optic patch cable 2×SC 62.5/125 to 1×LC 9/125 & 1×LC 62.5, 3m

Mode Conditioning Fiber Optic Patch Cable 2 x SC 62.5/125 to 1 x LC 9/125 & 1 x LC 62.5 3M

This 3-meter mode conditioning fiber optic patch cable bridges single-mode transceivers and multimode networks, reducing DMD and ensuring stable Gigabit Ethernet transmission. FiberMania provides OEM and ODM customization, including connector types, lengths, and branding, for enterprise and data center projects.

SKU MCC-SCLCM1-3 Category
Request a Quote
Share this product with

This Mode Conditioning Fiber Optic Patch Cable is specifically engineered to allow Gigabit Ethernet 1000Base-LX transceivers to operate reliably over existing multimode cabling infrastructures. By combining single-mode and multimode fibers in a single assembly, the cable provides an offset launch that mitigates Differential Mode Delay (DMD), reducing modal dispersion and ensuring stable high-speed data transmission.

The cable features two SC 62.5/125 multimode connectors on the transmitting side and one LC 9/125 single-mode plus one LC 62.5 multimode connector on the receiving side. This design enables seamless integration between single-mode optical transceivers and multimode network environments, without requiring costly upgrades to the cabling infrastructure. The 3-meter length provides sufficient flexibility for standard patching within racks, equipment rooms, or data center setups.

Each assembly is manufactured to meet IEEE 802.3z standards, ensuring consistent performance and minimal signal degradation. The rugged mode conditioning offset ensures low insertion loss and reliable bidirectional communication, while the high-quality connectors provide secure, repeatable terminations. Ideal for enterprise networks, data centers, and mission-critical installations, this cable offers both practical cost savings and performance reliability.

Featured Specialty Patch Cables Selection Table

SKU Fiber Count Fiber Type Cable Type Connector A Connector B Features Cable Color Length
CSULCU-SM0523YL05 2 OS2 SM Uniboot CS/UPC LC/UPC LSZH Yellow 5FT
LCLCUD-M3023RAQ01 2 OM3 Uniboot LC/UPC LC/UPC OFNR, 3.0mm Aqua 1M
LCLCUD-M5023RBK02 2 OM2 Uniboot LC/UPC LC/UPC Indstrial Grade, IP67, Dustproof, Outdoor Black 1M
LCULCU-M5022RLM 2 OM5 Uniboot LC/UPC LC/UPC OFNR, Pull Tab Lime 1M
LCLCUD-M5023RLM01 2 OM5 Uniboot LC/UPC LC/UPC OFNR, 3.0mm Lime 1M
MCC-LCLCM1-3 2 OS2, OM1 Mode Conditioning 2 LC OM1 LC OS2 + LC OM1 3M
MCC-LCSTM1-10 2 OS2, OM1 Mode Conditioning 2 LC OM1 ST OS2 + ST OM1 10M
MCC-MJLCM1-3 2 OS2, OM1 Mode Conditioning MTRJ LC OS2 + LC OM1 3M
MCC-SCSTM1-10 2 OS2, OM1 Mode Conditioning 2 SC OM1 ST OS2 + ST OM1 10M
PMF-R023LSF 1 PM850 / PM980 / PM1310 / PM1550 Polarization Maintaining LC / SC / FC LC / SC / FC 1M
Connector Types:2 × SC 62.5/125 to 1 × LC 9/125 & 1 × LC 62.5
Fiber Type:OM1 62.5/125 µm multimode + 9/125 µm single-mode
Fiber Count:2
Insertion Loss≤ 0.3 dB
Return Loss≥ 20 dB
Jacket Size3.0 mm
Jacket ColorOrange
Cable Length3 meters
Standards ComplianceIEEE 802.3z

  • Mode conditioning cable designed for 1000Base-LX Gigabit Ethernet

  • Combines single-mode and multimode fibers to reduce Differential Mode Delay (DMD)

  • 2×SC 62.5/125 connectors to 1×LC 9/125 & 1×LC 62.5

  • 3-meter length suitable for typical rack and equipment room deployments

  • Rugged offset closure for consistent optical performance

  • IEEE 802.3z compliant, ensuring reliable high-speed transmission

  • Bridging single-mode transceivers to existing multimode cabling in enterprise networks

  • Data center upgrades where replacing multimode fiber is impractical

  • High-performance backbone connections requiring minimized modal dispersion

  • Network equipment testing and lab environments with mixed fiber types

  • Ideal for installations where both performance reliability and cost-effective migration are needed

  • Custom cable lengths to match rack or patch panel layouts

  • Optional jacket materials and colors based on installation requirements

  • OEM labeling and packaging for project or corporate branding

  • ODM-level engineering support for tailored enterprise or data center solutions

Customize Your Specialty Fiber Patch Cord Solution

Specialty Cable Type Uniboot / Mode Conditioning / Polarization Maintaining (PM)
Fiber Type OS2 / OM1-OM5 / Polarization Maintaining
Connector Type LC / SC / FC / ST / MPO/MTP / Customized Connectors
Connector Polish UPC / APC
Fiber Count Simplex / Duplex / Multi-Fiber
Cable Jacket PVC / LSZH / Plenum / OFNR / Armored Options
Cable Diameter 1.6mm / 2.0mm / 3.0mm / Customized
Length Customized Length Available
Polarity & Configuration Duplex A-B / A-A / Customized Polarity
Testing & Certification IL & RL Test Report / Customized Test Requirements

Q1: What is the primary function of a mode conditioning patch cable?
It allows single-mode transceivers to operate over multimode fiber by providing an offset launch, reducing Differential Mode Delay (DMD) and ensuring reliable Gigabit Ethernet transmission.

Q2: Can this cable be used with 10G Ethernet?
Mode conditioning cables are primarily designed for 1000Base-LX. For 10G applications, dedicated single-mode or OM3/OM4 multimode solutions are recommended.

Q3: Can FiberMania customize this cable?
Yes. Length, connector types, and jacket options can be tailored for specific network or data center requirements.

Q4: Is this cable compatible with standard SC and LC ports?
Yes. It uses standard SC and LC connector interfaces for seamless integration with existing network equipment.

Q5: What is the typical lead time for orders?
Standard configurations usually ship within 3–7 working days; custom orders depend on specifications.

Related products

Sort Product By Tags#
1*32 2U 19" 3U 19" 4U 19" accessory Armored Bow-type Hybrid LC Adapter Panels MTRJ protection Quick Connector Ultra Compact Ultra HD